In re-installing the windshield washer nozzles on my series II FHC (not 2+2), the plastic hose connecting the driver side nozzle slipped out of my hand and disappeared into the car. I've removed the top of the dashboard but can't get my hand where it needs to go to re-attach the nozzle.
Any suggestions on how I can re-attach the plastic hose?
Submitted by NC98-50822 on Fri, 02/14/2014 - 15:08
Submitted by meering@comcast.net on Fri, 02/07/2014 - 15:12
Re-installing washer nozzles on Series II FHC
dennis, john meering of ncjoc , if you would like to call me on 301 609 8557 i might be aele to help you . call any time its copnveniate.jam
Submitted by bonnettoboot@e… on Thu, 02/06/2014 - 22:12
Re-installing washer nozzles on Series II FHC
Try getting help from someone who has small hands,
Submitted by SE98-32482CJ on Thu, 02/06/2014 - 19:52
Re-installing washer nozzles on Series II FHC
Sorry but the only answer is "keep looking--or feeling" or just get a new hose--BTW that might be my choice!
John -- I was able to re-attach the hose to the nozzle. I removed the flasher unit at the top of the fuse panel and was able, with my wife's help, to re-attach the hose. Actually, my wife suggested we remove the hose from the tee joint, attach the hose to the nozzle then feed it through the hole. We did and I was able to grab the hose through the opening I created and re-attach it to the tee joint. Unfortunately, I was not able to screw the wing nuts to the nozzles -- there is no way I can get my hands in there. I'll just re-attach the nozzles with silicone.
Thanks for your offer to help!