Greetings All,
This is a longshot but I'll try.
In the process of remaking the rear apron/skid plate of my SS1.
The original suffered greatly from setting on the ground for several decades along with the fact that the previous owner relocated the battery to this location,
While I've overall dimensions there are a couple of things no longer existing due to the rust.
There were two round openings about 4-5". I'm looking for the actual diameters and their locations, One of the holes is used for the tank drain.
Don't care how the location/placement is measured as long as I can duplicate it.
The holes are side by side towards the front of the car.
Any help would be appreciated.
Thanks, Bob Lovell