Does anyone know a place that rebuilds/repairs MCs?
I have mine apart and find the piston stuck.
Thanks,
Raj
Submitted by thornton.bryan… on Tue, 09/18/2012 - 14:41
Submitted by tvtom@sbcglobal.net on Mon, 08/27/2012 - 11:31
Re.: Series II Master Cylinder rebuild/repair
Edited on 2012-08-27 11:32:33
If the Series II MC's are similar to Series I, a little puff of compressed air will usually pop that piston out. I hold the cyl aimed downward about one-half inch above a board so the piston will strike that board and not totally exit the cyl. There are internal springs involved so be careful or parts will fly in several directions,
Submitted by SE98-32482CJ on Mon, 08/27/2012 - 06:03
Series II Master Cylinder rebuild/repair
Raj they are made new and not expensive. Call SNG Barratt----
How bad a job is it to do? I don't have anyone local willing to touch my 71 4.2 E, and I think it's just a little goofy to drive about in the car as its master cylinder is going bad.