Would anyone have a diagram of the wires going to and from the kickdown connector on this transmission?
Submitted by bonnettoboot@e… on Mon, 08/01/2011 - 19:22
Submitted by SE98-32482CJ on Mon, 05/30/2011 - 07:46
77XJ12
The illustrations in E 190/2 (service manual for V 12 series 2 and Daimler Double six shows the wire leaving the switch at a 45 deg angle and passing directly by the vent opening. From there it passes directly up the V of the engine to the switch on the throttle pedestal. At the micro switch on the pedestal there are two wires --one green (power) and switch feed (green and white). Hope that helps. If you have a manual look at 44.30.12. Good luck.
Submitted by bonnettoboot@e… on Mon, 05/30/2011 - 01:05
Submitted by SE98-32482CJ on Sun, 05/29/2011 - 17:09
Some one had fitted a new harness with 2 wires and connected them both, Thanks